Globe Valve
Globe Valve
Type: Stainless Steel Fluid Control Valve
Size: 1/2 inches to 2 inches
Nominal Pressure: 13 BAR
Max Temp: 180 C
Connection: Threaded, Compression Filling, Bolt Flange, Clamp Flange, etc.
Introduction to Globe Valve
A stainless-steel valve to control fluid flow in a system or device. This valve is generally helpful when using it in a spherical body. Our company fluid Control Solution has a great name and history in the world of the valves.
Construction
An integral part of this valve is the body that sustains the pressure on the valve. Also, the body of the valve makes its mass value. Further, the body contains the integral parts of the valve. Thus, these parts in the valve’s body will encounter fluid flowing through the system.
If we talk about the internal structure of the valve, it consists of two ports. Also, we can use these ports in three different ways. One of the methods is to put the ports against each other in a straight line. Also, you can set the ports anywhere. Further, ports can work at a specific angle, such as 90 degrees. If you use this valve with angled ports, you can name it an angle globe valve.
Working of the Globe Valve
We should note that this valve is best when working in a linear motion. Also, you can’t use the globe valve in the uni-directional method. Further, the disk on the valve works to complete multiple purposes. So, it can help top, start, and regulate fluid flow in the system.
Depending upon the method of use, the disk on the valve can be in three positions. The disk can be between the back and valve seats for normal fluid flow. Also, it can block the fluid path. Further, you can remove the disk from the fluid path to change the fluid flow as needed.